How to Make a Double Braided Hawaiian Ribbon Lei with Four Strands (2024)

Published: Apr 16, 2015 · Modified: Jun 13, 2020

This easy tutorial shows you how to make a double braided Hawaiian ribbon lei with four strands!

Remember when I shared how to make a basic, two strand braided ribbon lei and promised that a tutorial for the more complex, four strand version was forthcoming? Here it is! Today I'm sharing how to make a double braided Hawaiian ribbon lei with four strands of ribbon.

Honestly, it's still fairly simple in the grand scheme of ribbon leis, but it's complex enough to look special and can be pretty wide when made with ribbon larger than ¼". It's great for occasions like Mother's Day, graduation, or even weddings. Wouldn't these be cool as wedding favors? Or even as a make and take project for a summer birthday party?

This post may include affiliate links, which means I may make a commission on purchases made through these links at no additional cost to you.

Because this lei uses four strands of ribbon, you can us anywhere betweenone and fourdifferent colors. I think two or three lookbest, but the choice is yours. The example is made with two colors of ⅜" ribbon. Using ⅜" ribbon for this project creates a pretty wide finished lei (mine is about 1.5" across) that shows up really well in photos.

The exact amount of ribbon you need depends on how wide the ribbon is and how long you want your lei to be. Most lei have about a yard of actual braiding, but you can make them longer or shorter.

I recommend starting with pieces of ribbon that are at least 6 yards long.

Basic satin ribbon is pretty inexpensive - this project is all about the time you put into it, not the cost in dollars. I think it's better to waste a few feet of ribbon than the hour you put into perfectingthe technique and making a lei! Okay, so maybe not a whole hour, but still. Cut your ribbons at least 6 yards long, preferably 7 or even 8.

Once you figure out how to do this four strand braid, it actually isn't that difficult. Explaining it in words and figuring out exactly where everything goes the first time around...well, that can be a little tricky! Don't give up, though. Once you figure it out, you will be making these in 15 minutes! Just take your time, look at the pictures, and watch the video clip. =)

Materials needed for four strand braided ribbon lei

• Four pieces of ribbon, at least 6 yards each. I used⅜" satin ribbon, but ¼" satin ribbon is a great tool to learn with
• Four old gift cards, rewards cards you hardly use, etc. You can also use ID badges or ID badge blanks like these
• Four binder clips or quilting quilting clips
• Scissors
• A lighter, to singe the ends and prevent fraying

PS - If you shop on Amazon and you're not signed up for Ebatesyet (They're called Rakuten now, but it's Ebates), you're leaving money on the table! It's free to sign up and you can get money back on sites like Amazon, Walmart, and Target.

How to make a four strand double braided Hawaiian ribbon lei

1. Prepare yourribbons!Use an old gift card (or something similar) as a bobbin to wind up each piece of ribbon. Wrap the ribbon securely, but don't pull it super tight around the card or you'll end up with odd creases! Make sure to leave about a foot of extra un-wound and secure the ribbon with a binder clip or Wonder Clip.Wrap each piece of ribbon around a separate card.

2. Pair off your ribbons. I used two pairs with a light and a dark purple each. These ribbon pairs will be buddies for the rest of the lei! They'll interact with the other pair, but only ever actually truly work with their ribbon partner.

3. Tie a slip knot in one ribbon from each pair, making sure to leave a good 6-8 inches in tail (or more, if you'd like to tie a fancy bow). This is really important: tie the knots on different colored ribbons. I tied one on a light purple and the other on a dark purple. If you tie both of one color and leave both of the other color loose, your lei won't look like mine.

4. Fold over a little bunny ear loop, as if you were making a bow while tying your shoes, and insert this loop through the slipknot of its ribbon partner. Snug the slipknot down. Repeat with the other set.

5.Now it's time to get set up for your braid! This step is very important. If you don't set your ribbons up as shown, your lei probably won't stay together in one strand.

6. From here on out, it is important to remember you always work with the top loop first. Make a bunny ear loop in the partner ribbon that goes with the top loop, insert it through the loop, and then pull tight. Repeat, repeat, repeat until you reach the end. It is so much easier to share a video instead of a zillion pictures that don't show the movement, so here it is:

You'll start to see the pattern develop quickly. Here's what it looks like on the front:

And the back:

7. Keep going until your lei is as long as you want. On the very last loops, pull the ribbon all the way through instead of leaving a little bunny ear sticking out.

8. Tie the ends together and finish with a bow, if that's your style. Trim the ends and singe them quickly/carefully with a lighter to prevent fraying! Satin ribbon will fray like nobody's business, so this is a really good idea.

9. Gift your beautiful new lei or keep it for yourself. I'm not telling. 😉

More lei tutorials

If you'd prefer to make something a little quicker and easier, check out the simple braided ribbon lei tutorial right here!

You might also be interested in this lovely two straw yarn lei. It's another great option when you want to use several colors for a graduation lei!

Who will you make a lei for?